Question 1

Does this kit work with the Nespresso Vertuo Next? I've heard issues with other refill kits.

Accepted Answer

Yes, it's tested with the Vertuo Next. The key is to ensure the foil is pressed very flat and the pod is completely dry before insertion. Some Next machines have a longer needle that can puncture the side of a reused pod if it's not seated correctly, so push it in firmly. A handful of users reported occasional misreads, but nothing that a quick re-positioning didn't fix.

Question 2

Can the holder be used to press the foil onto a pod that's already full of coffee, or did I need a separate tamper?

Accepted Answer

The included holder serves as both a sealing press and a light tamper. After filling the pod, use the flat bottom of the holder to gently press the grounds down (just a small compression), then place the foil on top and use the holder's rim to press the foil's edges. It's a two-in-one tool, which is very convenient for travel.

Question 3

Can I reuse official Nespresso pods after the foil has been removed, or do I need special reusable pods?

Accepted Answer

You can absolutely reuse official Nespresso Vertuo pods! In fact, many users prefer them because the plastic is more robust than aftermarket pods. Just be sure to remove all leftover grounds and wipe the rim completely dry so the new foil seal will adhere properly. The kit's brush is designed specifically for that step.

Question 4

Is there a way to get a better crema with this refill system?

Accepted Answer

Some users recommend adding a tiny pinch of baking soda to the coffee grounds—but that's a controversial tip that can alter flavor. More conventional advice: use a fine espresso grind, pack it firmly, and make sure your coffee is fresh. Also, don't overfill the pod; leaving about 2 mm of headspace helps the pressure build and results in a slightly better crema.

Question 5

Is the aluminum foil lid safe to put in a Vertuo machine? It won't damage the piercing mechanism, right?

Accepted Answer

No, it won't damage the machine. The foil is thin enough that the machine's needle pierces it cleanly. However, you should never use the foil lid upside down or fold it, as that could cause a thicker edge, which might jam the piercing mechanism. Always press it down flat with the holder included in the kit.

Question 6

What is the best way to clean the used pods between refills?

Accepted Answer

Most users simply tap out the spent coffee grounds over the trash, then use the brush to dislodge any remaining powder. Rinsing the pod under a tap is okay, but dry it thoroughly with a cloth or leave it to air dry before using it again—moisture can cause the machine to steam or sputter during extraction.

Question 7

How do I know that the pod's barcode is still readable after multiple uses?

Accepted Answer

The barcode on the rim of the original pod typically stays readable for many refills. You should avoid scrubbing the rim with anything abrasive—just use the soft brush provided. If the barcode becomes scratched or faded over time, you can try using a permanent marker to darken the black lines, but realistically you'll replace the pod long before that becomes an issue.

Menu

Explore Content

Shop by Category

Nessus Reusable Kit for Nespresso Pods Vertuo, Reuse Old Coffee Pods for Nespresso Vertuo: 100 Pcs Aluminum Foil Seal Lid, Holder, Brush, Refillable Vertuo Plus Next Capsule Machine(No Pods Come) Black 1 Holder + 100 Foils + 1 Brush

Technical Specifications

Community Q&A

Customer Insights

Foil Seal Quality

Value for Money

Brew Quality

Ease of Use

Durability of Reused Pods

Messiness

About This Review

How We Review This Product

Our Research Process