Question 1

Do the patches leave a sticky residue if removed?

Accepted Answer

If removed within a few hours, yes – the adhesive is aggressive and remains tacky. After 24+ hours, removal becomes difficult and may tear the underlying material. You can use rubbing alcohol to clean residue, but it's not recommended for temporary fixes.

Question 2

Can I use these patches on a pool liner?

Accepted Answer

No, pool liners are typically made of softer PVC that requires a solvent-based glue (like Pool Patch underwater adhesive). These TPU patches are designed for above-ground inflatables, not permanent pool repairs. They may stick temporarily but will fail within a week.

Question 3

Will this work on a camping air mattress with a slow leak?

Accepted Answer

Yes, if you can locate the leak (soapy water test). The TPU patch works well on PVC and vinyl air mattresses. Clean the area with alcohol, let dry, apply patch, and press firmly. For slow leaks, the patch should hold for the entire camping trip. Some users report needing to reapply after a few uses on heavily used mattresses.

Question 4

Are the deflate tubings reusable?

Accepted Answer

Yes, the plastic tubes are reusable. Rinse and dry after use. They fit standard air mattress valves. Note: they do not have a cap, so air can escape if not pinched. Some users cut the tube to create a one-way valve.

Question 5

What's the best way to apply the patch on a curved surface like a ball?

Accepted Answer

Cut the patch smaller (about 1 inch larger than the hole) to allow flexibility. Apply it while the ball is slightly deflated so the surface is flatter. Press and hold for 30 seconds, then slowly inflate. For best results, use a heat gun (low setting) to soften the patch slightly – but be careful not to melt the material.

Question 6

Can I use this on a tent with a tear in the mesh?

Accepted Answer

No, TPU patches are solid sheets – they will block ventilation and add weight. For mesh repairs, use a mesh patch kit or Tenacious Tape mesh. These patches are only for solid fabric/vinyl.

Question 7

Does the kit expire?

Accepted Answer

The adhesive has a shelf life of about 2 years if stored in a cool, dry place. The patches come in a sealed bag – once opened, use within 6 months. Some old kits shipped from China may arrive with dried-out adhesive if stored for years. Check the manufacture date if possible.

Question 8

How many patches come in the 20 pack?

Accepted Answer

The 20-pack includes 20 individual sheets of patches. However, some users report that the package counts 'patches' as the larger sheets that contain multiple small cut-outs. For example, one sheet might have 4 small round patches, but it's counted as 1. So total individual patches could be around 30-40. Check product images for actual count.

Menu

Explore Content

Shop by Category

10Leccion 20 Pack of TPU Pool Patch Repair Kit for Air Mattress, Swimming Pool, Bounce House, Tent, Canvas, Canopy, Floats, Tubes Bed and Inflatable Toys with 2 Pieces Plastic Deflate Tubing

Technical Specifications

Community Q&A

Customer Insights

Adhesion Strength

Value for Money

Patch Size Variety

Ease of Application

Long-Term Durability

Surface Preparation Requirement

About This Review

How We Review This Product

Our Research Process